Eco-Friendly Poly (Butylene Adipate-co-Terephthalate) Coated Bi-Layered Films: An Approach to Enhance Mechanical and Barrier Properties.

In this research work, a coated paper was prepared with poly (butylene adipate-co-terephthalate) (PBAT) film to explore its use in eco-friendly food packaging. The paper was coated with PBAT film for packaging using hot pressing, a production method currently employed in the packaging industry. The coated papers were evaluated for their structural, mechanical, thermal, and barrier properties. The structural morphology and chemical analysis of the coated paper confirmed the consistent formation of PBAT bi-layered on paper surfaces. Surface coating with PBAT film increased the water resistance of the paper samples, as demonstrated by tests of barrier characteristics, including the water vapor transmission rate (WVTR), oxygen transmission rate (OTR), and water contact angle (WCA) of water drops. The transmission rate of the clean paper was 2010.40 cc m-2 per 24 h for OTR and 110.24 g m-2 per 24 h for WVTR. If the PBAT-film was coated, the value decreased to 91.79 g m-2 per 24 h and 992.86 cc m-2 per 24 h. The hydrophobic nature of PBAT, confirmed by WCA measurements, contributed to the enhanced water resistance of PBAT-coated paper. This result presents an improved PBAT-coated paper material, eliminating the need for adhesives and allowing for the fabrication of bi-layered packaging.

Chitosan-Based Films Blended with Tannic Acid and Moringa Oleifera for Application in Food Packaging: The Preservation of Strawberries (Fragaria ananassa).

Biobased plastics provide a sustainable alternative to conventional food packaging materials, thereby reducing the environmental impact. The present study investigated the effectiveness of chitosan with varying levels of Moringa oleifera seed powder (MOSP) and tannic acid (TA). Chitosan (CS) biocomposite films with tannic acid acted as a cross-linker, and Moringa oleifera seed powder served as reinforcement. To enhance food packaging and film performance, Moringa oleifera seed powder was introduced at various loadings of 1.0, 3.0, 5.0, and 10.0 wt.%. Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy analyses were performed to study the structure and morphology of the CS/TA/MOSP films. The scanning electron microscopy results confirmed that chitosan/TA with 10.0 wt.% of MOSP produced a lightly miscible droplet/matrix structure. Furthermore, mechanical properties, swelling, water solubility, optical barrier, and water contact angle properties of the film were also calculated. With increasing Moringa oleifera seed powder contents, the biocomposite films' antimicrobial and antifungal activity increased at the 10.0 wt.% MOSP level; all of the observed bacteria [Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), Aspergillus niger (A. niger), and Candida albicans (C. albicans)] had a notably increased percentage of growth. The film, with 10.0 wt.% MOSP content, effectively preserves strawberries' freshness, making it an ideal food packaging material.

A Study on the Antibacterial, Antispasmodic, Antipyretic, and Anti-Inflammatory Activity of ZnO Nanoparticles Using Leaf Extract from Jasminum sambac (L. Aiton).

The green synthesis of zinc oxide nanoparticles (ZnO NPs) using plants has grown in significance in recent years. ZnO NPs were synthesized in this work via a chemical precipitation method with Jasminum sambac (JS) leaf extract serving as a capping agent. These NPs were characterized using UV-vis spectroscopy, FT-IR, XRD, SEM, TEM, TGA, and DTA. The results from UV-vis and FT-IR confirmed the band gap energies (3.37 eV and 3.50 eV) and the presence of the following functional groups: CN, OH, C=O, and NH. A spherical structure and an average grain size of 26 nm were confirmed via XRD. The size and surface morphology of the ZnO NPs were confirmed through the use of SEM analysis. According to the TEM images, the ZnO NPs had an average mean size of 26 nm and were spherical in shape. The TGA curve indicated that the weight loss starts at 100 °C, rising to 900 °C, as a result of the evaporation of water molecules. An exothermic peak was seen during the DTA analysis at 480 °C. Effective antibacterial activity was found at 7.32 ± 0.44 mm in Gram-positive bacteria (S. aureus) and at 15.54 ± 0.031 mm in Gram-negative (E. coli) bacteria against the ZnO NPs. Antispasmodic activity: the 0.3 mL/mL sample solution demonstrated significant reductions in stimulant effects induced by histamine (at a concentration of 1 µg/mL) by (78.19%), acetylcholine (at a concentration of 1 µM) by (67.57%), and nicotine (at a concentration of 2 µg/mL) by (84.35%). The antipyretic activity was identified using the specific Shodhan vidhi method, and their anti-inflammatory properties were effectively evaluated with a denaturation test. A 0.3 mL/mL sample solution demonstrated significant reductions in stimulant effects induced by histamine (at a concentration of 1 µg/mL) by 78.19%, acetylcholine (at a concentration of 1 µM) by 67.57%, and nicotine (at a concentration of 2 µg/mL) by 84.35%. These results underscore the sample solution's potential as an effective therapeutic agent, showcasing its notable antispasmodic activity. Among the administered doses, the 150 mg/kg sample dose exhibited the most potent antipyretic effects. The anti-inflammatory activity of the synthesized NPs showed a remarkable inhibition percentage of (97.14 ± 0.005) at higher concentrations (250 µg/mL). Furthermore, a cytotoxic effect was noted when the biologically synthesized ZnO NPs were introduced to treated cells.

Synthesis, Spectral Characterization and Photoluminescence of 3-chloro-6-methoxy-2-(methylsulfanyl)quinoxaline in Different Solvents: An Experimental and Theoretical Investigation Using DFT.

In the present work, we synthesized 3-chloro-6-methoxy-2-(methyl sulfanyl) quinoxaline (3MSQ) using a microwave-assisted synthesis method. The physicochemical structural analysis of the synthesized compound utilizing 1H-NMR, 13C-NMR, and FT-IR spectroscopy techniques. The photophysical properties of 3MSQ was examined through absorption and fluorescence spectroscopy. Spectroscopic analyses revealed a bathochromic shift in both absorption and fluorescence spectra, attributed to the π → π* transition. Ground and excited state dipole moments was experimentally determined using the solvatochromic shift method, employing various correlations such as Lippert's, Bakhshiev's, Kawski-Chamma-Viallet's equations, and solvent polarity parameters. Our findings indicate that the excited state dipole moments exceed those of the ground state, suggesting increased polarity in the excited state. Further, the while detailed bond length, bond angles, dihedral angles, Mulliken charge distribution, ground state dipole moments and HOMO-LUMO energy gap estimated through ab initio computations using Gaussian-09W. The value of energy band gap obtained from both the methods are in good agreement. Furthermore, employing DFT computational analysis, we identified reactive centers such as electrophilic and nucleophilic sites using molecular electrostatic potential (MESP) 3D plots. Additionally, CIE chromaticity analysis was performed to understand the photoluminescent properties of 3MSQ. The insights derived from these analyses contribute to a better understanding of the molecule's electronic structure, photophysical properties, and solute-solvent interactions, thus providing valuable information regarding its behaviour and characteristics under diverse conditions. These results contribute to a comprehensive understanding of the molecular structure and properties of 3-chloro-6-methoxy-2-(methyl sulfanyl) quinoxaline (3MSQ).

Achieving Well-Oriented FAPbI3 Perovskite Photovoltaics by Cyclohexane Modification.

It is essential and challenging to develop green and cost-effective solar cells to meet the energy demands. Solar cells with a perovskite light-harvesting layer are the most promising technology to propel the world toward next-generation solar energy. Formamidinium lead tri-iodide (FAPbI3)-based perovskite solar cells (F-PSCs), with their considerable performance, offer cost-effective solar cells. One of the major issues that the PSC community is now experiencing is the stability of α-FAPbI3 at relatively low temperatures. In this study, we fabricated FAPbI3-PSCs using cyclohexane (CHX) material via a two-step deposition method. For this purpose, CHX is added to the formamidinium iodide:methylammonium chloride (FAI:MACl) solution as an additive and used to form a better FAPbI3 layer by controlling the reaction between FAI and lead iodide (PbI2). The CHX additive induces the reaction of undercoordinated Pb2+ with FAI material and produces an α-FAPbI3 layer with low charge traps and large domains. In addition, the CHX-containing FAPbI3 layers show higher carrier lifetimes and facilitate carrier transfer in F-PSCs. The CHX-modified F-PSCs yield a high champion efficiency of 22.84% with improved ambient and thermal stability behavior. This breakthrough provides valuable findings regarding the formation of a desirable FAPbI3 layer for photovoltaic applications and holds promise for the industrialization of F-PSCs.

Relationship of Vitamin-D Deficiency with Kidney Disease in Patients with Type-2 Diabetes Mellitus (T2DM) in the Makkah Region: A Cross-Sectional Study.

Aim: Vitamin D deficiency is linked with type 2 diabetes mellitus (T2DM) and the occurrence of complications in patients with type 2 diabetes mellitus. None of the studies have focused on the association between vitamin D levels in patients with type 2 diabetes mellitus and diabetic nephropathy (DN) in the Makkah region, Saudi Arabia. Hence, the purpose of this study is to investigate the relationship of vitamin D with kidney disease in patients with T2DM in the Makkah region, of Saudi Arabia. Materials and Methods: This descriptive cross-sectional study was conducted at different hospitals in the Makkah region on T2DM patients from 2021 to 2022. In total, 328 patients with confirmed diabetes were enrolled in this study. T2DM patients over the aged>18 to 92 years were included in the study. General laboratory characteristics of the study population were measured, including fasting blood sugar, HbA1C (Glycated hemoglobin), vitamin D, kidney function (BUN-Blood urea nitrogen and creatinine), and lipid profiles (cholesterol, triglycerides, LDL-Low density lipoprotein, and HDL-High density lipoprotein). Results: 46.6% (n=153) of participants had normal serum vitamin D levels. Insufficient and deficient serum vitamin D level were observed in 43.9% (n=144) and 9.5% (n=31) of participants, respectively. Of the participants, 25.9% (n=85) had good glycemic control (<7.0%). Moderate and poor glycemic control were observed in 39.9% (n=131) and 34.1% (n=112) of the participants, respectively. A significant negative correlation (p<0.5) was found between vitamin D levels and kidney function test results (blood urea nitrogen and serum creatinine levels). An inverse relationship was observed between HbA1c levels and vitamin D deficiency. Conclusion: Nephropathy is more likely to develop in people with type 2 diabetes mellitus and vitamin D deficiency.

Spectroscopic Studies on Structurally Modified Anthraquinone Azo Hydrazone Tautomer: Theoretical and Experimental Approach.

A series of unique four mono-azo substituted anthraquinone analogue were synthesized by using the anthraquinone components in the diazo-coupling technique. The FT-IR, 1H NMR, and HRMS, data were used to confirm the structure of the molecules, and spectroscopic techniques like UV-Vis, and photoluminescence spectroscopy were employed to estimate the photophysical properties of the molecules. The molecular optimized geometry and frontier molecular orbitals were estimated using density functional theory. Further, global chemical reactivity descriptors parameter was theoretically estimated using the value of the highest occupied molecular orbit and lowest unoccupied molecular orbits. The anti-tubercular action of the synthesised dyes were also examined. The results of this biological activity showed that N-isopropyl aniline combined with anthraquinone N-isopropyl aniline had superior anti-tubercular activity when compared to Rifampicin as the standard. As per molecular docking studies, the synthesized compound Q1 showed excellent binding energy (-10.0 kcal/mol) among all compounds against the 3ZXR Protein. These results agreed with our in-vitro anti-TB activity results.

Synergistic Influence of FRET on a High Quantum Yield π- Conjugate Polycarbazole-ZnS Composite Thin Film.

The incorporation of semiconducting materials into the π-conjugate polymer improves the optical, thermal, electrical, and electrochemical properties of optoelectronic devices. In this study, polycarbazole-zinc sulfide (PCZ) composites are synthesized via an in situ polymerization process, and their thin films are produced by spin coating. ZnS enhances the charge transfer qualities of polycarbazoles, which in turn results in better photophysical and electrical characteristics. The PCZ15 thin film has an optical band gap of 2.44 eV, a refractive index of 2.15, and an Urbach energy of 0.44 eV. Relative quantum yield for the PCZ15 was 38.4%, while Förster resonance energy transfer efficiency was 2%. Excellent thermal performance was shown by the PCZ15, which was 37.04% more efficient than the pure polycarbazole with an activation energy of 356 kJ/mol. PCZ15 has an outstanding charge mobility of 54.22 m2/(V s) and a conductivity of 0.298 S/cm. High charge transfer efficiencies were discovered by electrochemical analysis, which had a specific capacitance of 116 Fg-1. These characteristics strongly supported the viability of the PCZ15 thin film as a high-performance polymer-derived composite materials for optoelectronic devices.

Identification of a de novo LRP1 mutation in a Saudi family with Tetralogy of Fallot.

BACKGROUND: Tetralogy of Fallot (TOF) is a rare, complex congenital heart defect caused by genetic and environmental interactions that results in abnormal heart development during the early stages of pregnancy. Genetic basis of TOF in Saudi populations is not yet studied. Therefore, the objective of this study is to screen for the molecular defects causing TOF in Saudi patients. METHODS: A family with non-syndromic TOF was recruited from the Western region of Saudi Arabia. Whole exome sequencing (WES) was performed on the proband and her parents. The identified candidate variant was verified by sanger sequencing. Also, different computational biology tools were used to figure out how candidate variants affect the structure and function of candidate protein involved in TOF. RESULTS: A novel heterozygous de novo mutation in LRP1 (p. G3311D) gene was identified in the index case. Also, this variant was absent in the in-house exome sequencing data of 80 healthy Saudi individuals. This variant was predicted to be likely pathogenic, as it negatively affects the biophysical chemical properties and stability of the protein. Furthermore, functional biology data from knock out mouse models confirms that molecular defects in LRP1 gene leads to cardiac defects and lethality. This variant was not previously reported in both Arab and global population genetic databases. CONCLUSION: The findings in this study postulate that the LRP1 variant has a role in TOF pathogenesis and facilitate accurate diagnosis as well as the understanding of underlying molecular mechanisms and pathophysiology of the disease.

Sulfur Nanoparticle-Decorated Nickel Cobalt Sulfide Hetero-Nanostructures with Enhanced Energy Storage for High-Performance Supercapacitors.

Transition-metal sulfides exaggerate higher theoretical capacities and were considered a type of prospective nanomaterials for energy storage; their inherent weaker conductivities and lower electrochemical active sites limited the commercial applications of the electrodes. The sheet-like nickel cobalt sulfide nanoparticles with richer sulfur vacancies were fabricated by a two-step hydrothermal technique. The sheet-like nanoparticles self-combination by ultrathin nanoparticles brought active electrodes entirely contacted with the electrolytes, benefiting ion diffusion and charges/discharges. Nevertheless, defect engineers of sulfur vacancy at the atomic level raise the intrinsic conductivities and improve the active sites for energy storage functions. As a result, the gained sulfur-deficient NiCo2S4 nanosheets consist of good specific capacitances of 971 F g-1 at 2 A g-1 and an excellent cycle span, retaining 88.7% of the initial capacitance over 3500 cyclings. Moreover, the values of capacitance results exhibited that the fulfilling characteristic of the sample was a combination of the hydrothermal procedure and the surface capacitances behavior. This novel investigation proposes a new perspective to importantly improve the electrochemical performances of the electrode by the absolute engineering of defects and morphologies in the supercapacitor field.

Conjugated Polymers-Based Ternary Hybrid toward Unique Photophysical Properties.

The improvement of optical and optoelectronic properties of the individual poly [2-methoxy-5- (2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), poly[2-methoxy-5-(3,7-dimethyl-octyloxy)-1,4-phenylenevinylene]-End capped with Dimethyl phenyl (OC1C10-PPV-DMP), and poly (9,9'-di- n -octylfluorenyl-2,7-diyl) (F8) was revealed by blending them in ternary hybrid with optimal ratio (F8/2 wt.% MEH-PPV/2 wt.% OC1C10-PPV-DMP). All individual and optimal ternary solutions were prepared via the solution-blending method followed by depositing them onto glass and ITO substrates using spin-coating technique. The semi-crystalline phase of the ternary hybrid and the strong mixing between the conjugated polymers were evidenced by observing the X-ray diffraction patterns that related to F8 into the hybrid diffractogram. The optical and optoelectronic properties of all prepared thin films were investigated in terms of absorption and emission spectra, Commission International d'Eclairage (CIE) coordinates, and current-voltage (I-V) characterizations. Emission peaks at the entire range of visible spectrum can be revealed from the ternary hybrid of the three individual conjugated polymers, producing white emission as evidenced from the emission spectrum and CIE coordinates of the hybrid. Among all fabricated organic light-emitting diodes (OLEDs) devices, the ternary hybrid-based-OLED revealed the best performance in terms of current and turn-on voltage.

Role of mitochondrial DNA in diabetes Mellitus Type I and Type II.

Morbidity and mortality from diabetes mellitus and associated illnesses is a major problem across the globe. Anti-diabetic medicines must be improved despite existing breakthroughs in treatment approaches. Diabetes has been linked to mitochondrial dysfunction. As a result, particular mitochondrial diabetes kinds like MIDD (maternally inherited diabetes & deafness) and DAD (diabetic autonomic dysfunction) have been identified and studied (diabetes and Deafness). Some mutations as in mitochondrial DNA (mtDNA), that encodes for a significant portion of mitochondrial proteins as well as mitochondrial tRNA essential for mitochondrial protein biosynthesis, are responsible for hereditary mitochondrial diseases. Tissue-specificity and heteroplasmy have a role in the harmful phenotype of mtDNA mutations, making it difficult to generalise findings from one study to another. There are a huge increase in the number for mtDNA mutations related with human illnesses that have been identified using current sequencing technologies. In this study, we make a list on mtDNA mutations linked with diseases and diabetic illnesses and explore the methods by which they contribute to the pathology's emergence.

Amplified Spontaneous Emission from Thermally Evaporated High-Quality Thin Films of CsPb(Br1-xYx)3 (Y = I, Cl) Perovskites.

As a wavelength-tunable lasing material, perovskites are now generating a lot of scientific attention. Conventional solution-processed CsPbX3 perovskite films sometimes suffer unavoidable pinhole defects and poor surface morphology, severely limiting their performance on amplified spontaneous emission (ASE) and lasing application. Herein, a thermal evaporation approach is explored in our work to achieve a uniform and high-coverage CsPb(Br1-xYx)3 (Y = I, Cl) perovskites polycrystalline thin film. The ASE of these films was studied using a picosecond laser system. The ASE profile increases rapidly over the narrow peak in relation to the laser pump intensity, confirming the development of stimulated emission. ASE began when the energy density threshold was reached and ranged between 25 and 170 µJ/cm2 per pulse for perovskite materials when replacing I with Br and then Cl. This work emphasizes the notable optical properties of high-quality perovskite thin films, leading to possible accessible uses in optoelectronic applications.

Complex Inheritance of Rare Missense Variants in PAK2, TAP2, and PLCL1 Genes in a Consanguineous Arab Family With Multiple Autoimmune Diseases Including Celiac Disease.

Background: Autoimmune diseases (AIDs) share a common molecular etiology and often present overlapping clinical presentations. Thus, this study aims to explore the complex molecular basis of AID by whole exome sequencing and computational biology analysis. Methods: Molecular screening of the consanguineous AID family and the computational biology characterization of the potential variants were performed. The potential variants were searched against the exome data of 100 healthy individuals and 30 celiac disease patients. Result: A complex inheritance pattern of PAK2 (V43A), TAP2 (F468Y), and PLCL1 (V473I) genetic variants was observed in the three probands of the AID family. The PAK2 variant (V43A) is a novel one, but TAP2 (F468Y) and PLCL1 (V473I) variants are extremely rare in local Arab (SGHP and GME) and global (gnomAD) databases. All these variants were localized in functional domains, except for the PAK2 variant (V43A) and were predicted to alter the structural (secondary structure elements, folding, active site confirmation, stability, and solvent accessibility) and functional (gene expression) features. Therefore, it is reasonable to postulate that the dysregulation of PAK2, TAP2, and PLCL1 genes is likely to elicit autoimmune reactions by altering antigen processing and presentation, T cell receptor signaling, and immunodeficiency pathways. Conclusion: Our findings highlight the importance of exploring the alternate inheritance patterns in families presenting complex autoimmune diseases, where classical genetic models often fail to explain their molecular basis. These findings may have potential implications for developing personalized therapies for complex disease patients.

Photophysical Characteristics of Multicolor Emitting MDMO-PPV-DMP/ZnO Hybrid Nanocomposites.

The tuning of photophysical properties of the poly[2-methoxy-5-(3,7-dimethyl-octyloxy)-1,4-phenylenevinylene]-end capped with dimethylphenyl (DMP), MDMO-PPV-DMP, was achieved by incorporation of ZnO NPs with various contents. Hybrid nanocomposites of MDMO-PPV-DMP with ZnO NPs were prepared by solution blending method and then deposited onto glass substrates. The structural properties of the hybrid nanocomposites samples were characterized using X-ray diffraction, FTIR, and FE-SEM, while their optical properties were extracted from the absorption and photoluminescence spectra. The energy band gap, energy tail, steepness parameter, and CIE chromatic coordinates were tuned by increase the content of ZnO NPs into the polymer matrix. The ZnO NPs incorporation assists the emission wavelength shift and multicolor emitting from the hybrid nanocomposites.

Effects of Different Solvents Extractions on Total Polyphenol Content, HPLC Analysis, Antioxidant Capacity, and Antimicrobial Properties of Peppers (Red, Yellow, and Green (Capsicum annum L.)).

Plants possessing various bioactive compounds and antioxidant components have gained enormous attention because of their efficacy in enhancing human health and nutrition. Peppers (Capsicum annuum L.), because of their color, flavor, and nutritional value, are considered as one of the most popular vegetables around the world. In the present investigation, the effect of different solvents extractions (methanol, ethanol, and water) and oven drying on the antioxidant and antimicrobial properties was studied of red, yellow, and green peppers. The green pepper water extract showed the highest total polyphenol content (30.15 mg GAE/g DW) followed by red pepper water extract (28.73 mg GAE/g DW) and yellow pepper water extract (27.68 mg GAE/g DW), respectively. The methanol extracts of all the pepper samples showed higher TPC as compared to the ethanol extract. A similar trend was observed with the total flavonoid content (TFC). The antioxidant assays (DPPH scavenging and reducing power) echoed the findings of TPC and TFC. In both antioxidant assays, the highest antioxidant activity was shown by the water extract of green pepper, which was followed by the water extract of red pepper and yellow pepper. Furthermore, all extracts were assessed for their potential antimicrobial activity against bacterial and fungal pathogens. Aqueous extracts of all three pepper samples exhibited slightly higher inhibition zones as compared to their corresponding ethanolic and methanolic extract. Minimum inhibitory concentration (MIC) values ranged from 0.5 to 8.0 mg/ml. The lowest MIC values ranging from 0.5 to 2.0 mg/ml concentration were recorded for aqueous extracts of green pepper. High-performance liquid chromatography (HPLC) analysis revealed tannic acid as the major phenolic compound in all three pepper samples. Thus, it is envisaged that the microwave drying/heating technique can improve the antioxidant and antimicrobial activity of the pepper.

Nanoplatform for the Delivery of Topotecan in the Cancer Milieu: An Appraisal of its Therapeutic Efficacy.

Chemotherapy has been the predominant treatment modality for cancer patients, but its overall performance is still modest. Difficulty in penetration of tumor tissues, a toxic profile in high doses, multidrug resistance in an array of tumor types, and the differential architecture of tumor cells as they grow are some of the bottlenecks associated with the clinical usage of chemotherapeutics. Recent advances in tumor biology understanding and the emergence of novel targeted drug delivery tools leveraging various nanosystems offer hope for developing effective cancer treatments. Topotecan is a topoisomerase I inhibitor that stabilizes the transient TOPO I-DNA cleavable complex, leading to single-stranded breaks in DNA. Due to its novel mechanism of action, TOPO is reported to be active against various carcinomas, namely small cell lung cancer, cervical cancer, breast cancer, and ovarian cancer. Issues of cross-resistance with numerous drugs, rapid conversion to its inactive form in biological systems, appended adverse effects, and higher water solubility limit its therapeutic efficacy in clinical settings. Topotecan nanoformulations offer several benefits for enhancing the therapeutic action of this significant class of chemotherapeutics. The likelihood that the target cancer cells will be exposed to the chemotherapeutic drug while in the drug-sensitive s-phase is increased due to the slow and sustained release of the chemotherapeutic, which could provide for a sustained duration of exposure of the target cancer cells to the bioavailable drug and result in the desired therapeutic outcome. This article explores nanoenabled active and passive targeting strategies and combinatorial therapy employing topotecan to ameliorate various cancers, along with a glimpse of the clinical studies utilizing the said molecule.

Boiling Technique-Based Food Processing Effects on the Bioactive and Antimicrobial Properties of Basil and Rosemary.

Rosemary (Rosmarinus officinalis) and basil (Ocimum sanctum Linn) are mostly used as herbal teas, made by steeping whole or ground herbs in boiling water. Hence, it is important to know the effect of boiling time on the bioactivity of these herbs. The effect of different boiling times (5, 10, and 15 min) on the antioxidant and antimicrobial properties, and some selected phenolic compounds of these herbs was examined in this study. Experimental results revealed that basil displayed the highest total polyphenol content (TPC), total flavonoid content (TFC), and antioxidant activity when it was boiled for 5 min, and the lowest TPC was obtained when it was boiled for 15 min. On the other hand, rosemary had the highest TPC, TFC, and antioxidant potential after being boiled for 15 min, while it had the lowest after being boiled for 5 min. There was no growth inhibition of rosemary extracts against gram-negative bacteria, whereas higher growth inhibition was observed against gram-positive bacteria. The MIC and MBC of rosemary ethanolic extract against Listeria monocytogenes were 5 and 5 mg/mL and against B. subtilis were 10 and 10 mg/mL, respectively. While MIC and MBC of methanolic extract against L. monocytogenes were 5 and 5 mg/mL and against Bacillus subtilis were and 5 and 5 mg/mL, respectively. Salicylic acid was the most abundant (324.7 mg/100 g dry weight (dw)) phenolic compound in the rosemary sample boiled for 5 min, and acetyl salicylic acid was the most abundant (122.61 mg/10 g dw) phenolic compound in the basil sample boiled for 15 min.

Controlling the Emission Spectrum of Binary Emitting Polymer Hybrids by a Systematic Doping Strategy via Förster Resonance Energy Transfer for White Emission.

Tuning the emission spectrum of both binary hybrids of poly (9,9'-di-n-octylfluorenyl-2,7-diyl) (PFO) with each poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) and poly[2-methoxy-5-(3,7-dimethyl-octyloxy)-1,4-phenylenevinylene] end-capped with Dimethyl phenyl (MDMO-PPV-DMP) by a systematic doping strategy was achieved. Both binary hybrid thin films of PFO/MEH-PPV and PFO/MDMO-PPV-DMP with various weight ratios were prepared via solution blending method prior to spin coating onto the glass substrates. The conjugation length of the PFO was tuned upon addition of acceptors (MEH-PPV or MDMO-PPV-DMP), as proved from shifting the emission and absorption peaks of the binary hybrids toward the acceptor in addition to enhancing the acceptor emission and reducing the absorbance of the PFO. Förster resonance energy transfer (FRET) is more efficient in the binary hybrid of PFO/MDMO-PPV-DMP than in the PFO/MEH-PPV. The efficient FRET in both hybrid thin films played the major role for controlling their emission and producing white emission from optimum ratio of both binary hybrids. Moreover, the tuning of the emission color can be attributed to the cascade of energy transfer from PFO to MEH-PPV, and then to MDMO-PPV-DMP.

Enhancement of Light Amplification of CsPbBr3 Perovskite Quantum Dot Films via Surface Encapsulation by PMMA Polymer.

Photonic devices based on perovskite materials are considered promising alternatives for a wide range of these devices in the future because of their broad bandgaps and ability to contribute to light amplification. The current study investigates the possibility of improving the light amplification characteristics of CsPbBr3 perovskite quantum dot (PQD) films using the surface encapsulation technique. To further amplify emission within a perovskite layer, CsPbBr3 PQD films were sandwiched between two transparent layers of poly(methyl methacrylate) (PMMA) to create a highly flexible PMMA/PQD/PMMA waveguide film configuration. The prepared perovskite film, primed with a polymer layer coating, shows a marked improvement in both emission efficiency and amplified spontaneous emission (ASE)/laser threshold compared with bare perovskite films on glass substrates. Additionally, significantly improved photoluminescence (PL) and long decay lifetime were observed. Consequently, under pulse pumping in a picosecond duration, ASE with a reduction in ASE threshold of ~1.2 and 1.4 times the optical pumping threshold was observed for PQDs of films whose upper face was encapsulated and embedded within a cavity comprising two PMMA reflectors, respectively. Moreover, the exposure stability under laser pumping was greatly improved after adding the polymer coating to the top face of the perovskite film. Finally, this process improved the emission and PL in addition to enhancements in exposure stability. These results were ascribed in part to the passivation of defects in the perovskite top surface, accounting for the higher PL intensity, the slower PL relaxation, and for about 14 % of the ASE threshold decrease.